Specify two genuine spatial lines
Initially t and s are independent; all vectors use the same coordinate basis.
Two infinite spatial lines have four possible relations: coincident, distinct parallel, intersecting or skew. A zero direction is not another relation but an invalid line description. Coordinates and directions must use a common orthonormal basis and consistent units.[1]
Check direction and common points separately
If u and v are proportional, test whether q−p is a multiple of u. A successful test means coincident lines; otherwise they are distinct parallel lines. For nonproportional directions, solve p+tu=q+sv. A solution gives one intersection; a contradiction then means skew lines. All three coordinates must agree using the same two parameter values.[1]
The decision follows from the point sets. Parallel directions through a common point generate the same line. Nonparallel directions cannot share two different points, because the vector connecting them would have to be parallel to both directions. Thus that case permits at most one common point.[1]
Check intersection and skewness completely
One common point with two parameters
- Given
- g: X=(1,-2,0)+t(2,1,1), h: X=(5,0,2)+s(-1,2,0), t,s∈ℝ.
- Find
- Classify the lines and find an intersection if present.
The directions are not proportional; the third component prevents a common scalar multiple.
Equate all three coordinates.
Use the third equation first and check the others.
Substitute each parameter into its own line.
Result: The lines intersect exactly at (5,0,2). Their parameter values are t=2 and s=0.
Check: Nonparallel directions exclude coincident lines. Two distinct common points would force their connecting direction to belong to both lines, contradicting nonproportional directions. The intersection is therefore unique.
A projection suggests a false intersection
- Given
- g: X=(t,0,0), h: X=(0,s,2), t,s∈ℝ.
- Find
- Decide whether the crossing of xy-projections is an intersection in space.
Read the direction vectors.
A spatial intersection must match the z-coordinates too.
Combine the contradiction with nonparallel directions.
Result: The lines are skew. The crossing (0,0) in their xy-projections comes from the distinct spatial points (0,0,0) and (0,0,2).
Check: Every point of g has z=0 and every point of h has z=2, ruling out a common point. Their directions additionally show that the lines are not parallel.
Same projected point, different heights
Free with a Quanta account. Your download stays ready after registration.
Recall the method later with the formula’s flashcards.
10 flashcards · English materials
Already have an account? Sign in for flashcardsAvailable from Essential. A ready-made formula set, no AI credits required. Article exercises are not all included.
Parameters, segments and applications
A geometric parameter is not automatically time or distance. A dimensionless direction may use a length-valued parameter, while a length-valued direction may use a dimensionless one. In motion, they may instead represent velocity and time. Range restrictions and shared-time conditions come from the application. This calculation explicitly concerns two complete lines, not arbitrary curved paths.
Five solved exercises
Calculate · Application
Classify g: X=(1,1,1)+t(1,2,-1) and h: X=(2,3,0)+s(0,1,1).
Show hint
The x-coordinate determines t.
Learning goal: Solve a parameter system and check both lines.
Show solution and calculation
From 1+t=2, t=1.
Then 1+2t=3+s gives s=0, and 1−t=s also holds.
The directions are not proportional, so the intersection is (2,3,0).
Check: g(1)=h(0)=(2,3,0), matching every coordinate.
Rearrange · Application
For which a do g: X=(t,0,0) and h: X=(0,s,a) intersect?
Show hint
The z-equation has no line parameter.
Learning goal: Solve an intersection condition for a position parameter.
Show solution and calculation
Equating coordinates requires t=0, s=0 and 0=a.
Thus the lines intersect at the origin exactly when a=0; otherwise they are nonparallel and skew.
Check: for a=0, g(0)=h(0)=(0,0,0).
Interpret · Application
g: X=(1,0,2)+t(2,-1,1), h: X=(5,-2,4)+s(-4,2,-2). Do different base points prove that these are different lines?
Show hint
Compare directions and the difference of the base points.
Learning goal: Recognise different representations of the same point set.
Show solution and calculation
No. v=−2u and q−p=(4,−2,2)=2u.
Thus q lies on g and the lines coincide.
Their parameters satisfy t=2−2s.
Check: every h(s)=p+(2−2s)u belongs to g, and s ranges over all real numbers.
Error analysis · Foundation
A solution claims that nonparallel lines always intersect. Refute it using the projection example.
Show hint
In three dimensions the third coordinate must also match.
Learning goal: Avoid transferring a planar rule unchecked to space.
Show solution and calculation
The directions(1,0,0) and(0,1,0) are nonparallel, yet matching z-coordinates requires 0=2, so there is no spatial intersection.
The lines are skew.
The claimed rule applies to nonparallel lines in one common plane rather than arbitrary spatial lines.
Check: their xy-projection discards exactly the information preventing an intersection.
Transfer · Application
Two motions have coordinate values g(t)=(t,0,0) and h(t)=(1,t−2,0), with time in seconds and coordinates in metres. Does a geometric intersection prove a collision?
Show hint
Geometric line intersection permits independent time parameters.
Learning goal: Distinguish geometric intersection from simultaneous occupancy.
Show solution and calculation
The path lines intersect at(1,0,0): the first motion arrives after 1 s and the second after 2 s.
A collision requires the same time.
Matching x requires t=1, but h(1)=(1,−1,0) differs from g(1)=(1,0,0).
Hence no collision occurs.
Check: matching y requires t=2, contradicting t=1.
Check your understanding with the formula’s reference test.
8 test questions · English materials
Already have an account? Sign in for the testAvailable from Essential. A ready-made formula set, no AI credits required. Article exercises are not all included.
Use equation solving and distances afterwards
Gaussian elimination solves the coordinate-matching system. For parallel lines, distance reduces to a point-to-line distance. A vector magnitude turns an appropriate displacement into a length. These follow-up calculations do not replace classifying the relation.
Sources for this explanation
Quanta · Updated November 5, 2026
- TU Berlin, Preparatory Mathematics Course, 10.2.4 Relative Positions of Lines and Planes in Space, Info10.2.13
- North Rhine-Westphalia Ministry of School Education, upper-secondary Mathematics curriculum, 2023, introductory-phase Geometry, competencies 9 and 12 (German-language curriculum)
Editorial responsibility: Quanta Study editorial team
Review scope
This explanation, 2 worked examples and 5 exercises are available in German and English. Structure, source references and mathematical notation undergo automated checks. Calculations, model assumptions and both language versions receive a separate AI review.
An independent, named human subject review has not yet been documented. Our exercise numbers are worked examples, rather than measurements published by the cited sources.
Editorial responsibility, sources and methodsChange history
- Authored an independent DE/EN school article with a justification, two original examples, five solved exercises and a native diagram.
Cite this reference page
Quanta. Relations between two spatial lines. Updated November 5, 2026. https://quanta-study.de/en/formula-sheet/lagebeziehungen-geraden
When citing a specific scientific statement, also cite the specialist source linked to that statement.