What does the model describe?
Mean free path is the average distance between collisions in a dilute hard-sphere gas. It is a statistical mean, not an identical flight distance for every molecule.[1]
Mean free path is the average distance between collisions in a dilute hard-sphere gas. It is a statistical mean, not an identical flight distance for every molecule.
Two equal spheres of diameter d have collision cross section πd2, not π(d/2)2. The sqrt2 factor accounts for relative motion of identical thermal particles. Fixed targets give a different elementary model without this factor.[1]
Assumptions, quantities and limits
Assume equilibrium gas of identical dilute hard spheres, n=N/V and p=nkBT. Real cross sections may depend on energy. Liquids, dense gases and boundary transport do not generally follow this model.[1]
- mean free path (m)
- number density (m−3)
- hard-sphere diameter (m)
Reasoning step by step
Assume equilibrium gas of identical dilute hard spheres, n=N/V and p=nkBT. Real cross sections may depend on energy. Liquids, dense gases and boundary transport do not generally follow this model.[1]
Mean free time may be estimated with a consistently defined mean speed: τ≈ℓ/v̄. RMS and mean speed differ. At fixed T and d, halving p doubles ℓ.[1]
The Knudsen number Kn=ℓ/L compares mean free path with device length for continuum modelling. Small Kn supports a continuum approximation, with actual validity also depending on the problem and boundaries.[1]
Two equal spheres of diameter d have collision cross section πd2, not π(d/2)2. The sqrt2 factor accounts for relative motion of identical thermal particles. Fixed targets give a different elementary model without this factor.[1]
Two fully worked examples
Cross section and density
- Given
- n=1025 m−3, d=3·10−10 m.
- Find
- Find mean free path.
Calculate cross section.
Insert collision density.
Result: ℓ≈2.50088·10−7 m≈250.1 nm.
Check: nσ has units m−1; its reciprocal is a length.
Mean free time
- Given
- ℓ=200 nm, v̄=500 m/s.
- Find
- Estimate free time.
Convert nanometres to metres.
Divide by the consistent mean speed.
Result: τ≈0.4 ns.
Check: 500 m/s·0.4 ns=200 nm.
Recall the method later with the formula’s flashcards.
10 flashcards · English materials
Already have an account? Sign in for flashcardsAvailable from Essential. A ready-made formula set, no AI credits required. Article exercises are not all included.
Typical values: argon, air and vacuum
For argon at 0 °C and 1.00 atm with an atomic radius of 1.70·10−10 m, so d=3.40·10−10 m, the formula gives ℓ≈7.27·10−8 m, about 73 nm. With the mean speed that matches the hard-sphere formula, v̄=√(8RT/(πM))≈381 m/s for M=39.9 g/mol, the mean free time is τ=ℓ/v̄≈1.91·10−10 s, about 5.2·109 collisions per second; OpenStax estimates with the rms speed of 413 m/s and gets 1.76·10−10 s. For oxygen and nitrogen in air at 1 atm and 25 °C a LibreTexts chemistry text gives roughly 60 nm; with an assumed collision diameter of 0.37 nm the formula gives about 67 nm at 25 °C.[1][2][3]
At fixed temperature ℓ is inversely proportional to pressure, because falls with pressure. About 67 nm at atmospheric pressure becomes about 7 cm at 0.1 Pa, roughly a millionth of it. In high vacuum ℓ exceeds the size of the chamber: the Knudsen number rises above 1, and particles hit the walls more often than each other.[1]
Five exercises with solutions and learning goals
Calculate · Foundation
Triple n at fixed d: ℓ factor?
Show hint
Density is in the denominator.
Learning goal: Check physical assumptions and calculation steps together.
Show solution and calculation
1/3.
Rearrange · Foundation
Double d: ℓ factor?
Show hint
Use d2.
Learning goal: Check physical assumptions and calculation steps together.
Show solution and calculation
1/4 because cross section grows quadratically.
Interpret · Application
Is ℓ every individual flight distance?
Show hint
Distribution, not fixed distance.
Learning goal: Check physical assumptions and calculation steps together.
Show solution and calculation
No, it is their statistical mean.
Error analysis · Application
Is collision cross section π(d/2)2?
Show hint
Add both radii.
Learning goal: Check physical assumptions and calculation steps together.
Show solution and calculation
No.
Centres of equal colliding spheres can pass within distance d; σ=πd2.
Transfer · Challenge
ℓ=1 µm, L=1 mm: Kn?
Show hint
Use matching length units.
Learning goal: Check physical assumptions and calculation steps together.
Show solution and calculation
Kn=10−6/10−3=10−3.
Check your understanding with the formula’s reference test.
8 test questions · English materials
Already have an account? Sign in for the testAvailable from Essential. A ready-made formula set, no AI credits required. Article exercises are not all included.
Connections and further study
Continue with Pressure from kinetic theory, Root-mean-square molecular speed.
Sources for this explanation
Quanta · Updated November 6, 2026
- OpenStax University Physics2,2.2 Mean Free Path and Mean Free Time
- LibreTexts, OpenStax Chemistry remix, 5.5 Effusion and Diffusion of Gases
- OpenStax University Physics 2, §2.4: Distribution of Molecular Speeds
Editorial responsibility: Quanta Study editorial team
Review scope
This explanation, 2 worked examples and 5 exercises are available in German and English. Structure, source references and mathematical notation undergo automated checks. Calculations, model assumptions and both language versions receive a separate AI review.
An independent, named human subject review has not yet been documented. Our exercise numbers are worked examples, rather than measurements published by the cited sources.
Editorial responsibility, sources and methodsChange history
- Authored the DE/EN model with assumptions, original examples, five solved exercises and subject links.
Cite this reference page
Quanta. Mean free path. Updated November 6, 2026. https://quanta-study.de/en/formula-sheet/mittlere-freie-weglaenge
When citing a specific scientific statement, also cite the specialist source linked to that statement.