Distinguish nuclide, atomic mass and state
A is the integer number of nucleons; Z counts protons and N neutrons. Here N denotes neutron number; later N(t) denotes the number of parent nuclei remaining.[3]
Carbon-14 contains Z = 6 protons and N = 8 neutrons. Its mass number is 14, whereas its neutral-atom mass in AME2020 is approximately 14.003241989 u. A periodic-table value for carbon instead averages isotopes for a specified composition. It cannot replace a particular carbon-14 mass.[1]
The reference is the neutral carbon-12 atom in the defined ground state. Its mass is therefore exactly 12 in u, but other nuclide masses need not be exact integers.[1]
The selection lists ground states. Ground-state barium-137 is stable; barium-137m is a separate excited, metastable state. NUBASE2020 gives that state a half-life of 2.552(1) min. Their half-lives and masses must not be interchanged without a state label. Ionized atoms also differ from the neutral atoms represented in the mass column.[2]
Read parentheses, units and evaluation labels
5.2714(6) a means 5.2714 years with a stated uncertainty of 0.0006 years. The parentheses are neither extra digits of the value nor a percentage. In 5.70(3) × 103 a, multiply both the value and its uncertainty by the same power of ten: 5700 ± 30 years. The source determines the uncertainty status; displaying many digits does not make a value exact.[2]
The symbol a denotes year, d day, and min minute. Both times in t/T½ must use the same unit. The whole-half-life calculations below do not require conversion to seconds. If a value in seconds is needed, the chosen year length must be stated as an additional convention.[2]
Mass data come from AME2020, while half-lives and decay assignments come from NUBASE2020, both published in 2021. NUBASE2020 gives 5700 ± 30 years for carbon-14 and 30.04 ± 0.04 years for caesium-137. A classroom exercise may intentionally specify other rounded or differently evaluated values. Use the specified values consistently and identify them; substituting one digit does not resolve a difference in source editions.[1][2]
What α, β−, β+, EC and γ change
- α: the daughter nucleus has A − 4 and Z − 2. Only the dominant channel is shown for the selected heavy alpha emitters; very rare additional decay modes can exist.
- β−: A is unchanged and Z increases by one. A neutron becomes a proton; an electron and an electron antineutrino are emitted.
- β+ or EC: A is unchanged and Z decreases by one. Positron emission and electron capture are different processes; both occur in fluorine-18. The table does not state branching fractions.
- γ: nuclear excitation energy is emitted as a photon. A and Z remain unchanged. Following beta or alpha decay, an excited daughter may undergo further transitions; gamma emission alone does not independently change the element.
The “decay mode / dominant channel” column is not a complete radiation spectrum. Listing β− for cobalt-60 does not exclude subsequent gamma emission from its daughter system. Likewise, alpha as uranium’s dominant mode does not make spontaneous fission mathematically impossible. Line energies, intensities and branching fractions require the full evaluated decay scheme.[3][2]
Use neutral-atom masses consistently
Here Ebinding,e is the positive magnitude of the total electronic binding energy. Its sign follows because a bound atom has less mass than its nucleus plus free electrons.[3]
Electronic binding energy is sometimes neglected in rough estimates; the resulting nuclear mass is then explicitly approximate. Energy balances generally require all particles and electrons to use a consistent convention. For an ordinary β− decay, the Q value can be obtained approximately from the difference between neutral parent and daughter atomic masses times c2; the electron contributions are already appropriately balanced.[3]
The mass-defect reference explains how particle masses determine binding energy. The decay law treats remaining parent nuclei; activity connects their number with decays per second.
Two calculations using the reference data
Cobalt-60: remaining parent nuclei
- Given
- An isolated model population initially contains N0 = 8 000 000 cobalt-60 parent nuclei. Use the central values T½ = 5.2714 a and t = 10.5428 a, with no replenishment.
- Find
- Determine the expected number of parent nuclei remaining.
First write the symbolic decay model.
Both times are in years; their ratio is dimensionless.
Apply two halvings to the initial population.
Result: The expected remaining population is 2 million cobalt-60 parents, or 25%. This uses central values and does not replace uncertainty propagation.
Check: After the first half-life there would be 4 million, after the second 2 million. Daughter nuclei have not automatically vanished from the sample.
Carbon-14: a β− energy balance
- Given
- Use the neutral-atom central values M(14C) = 14.0032419886 u and M(14N) = 14.00307400425 u from the table. Use the given energy conversion 1 u·c2 ≈ 931.4941 MeV.
- Find
- Estimate the available decay energy without mixing atomic and nuclear masses.
Use neutral parent and daughter atomic masses for this β− decay.
Take the difference before converting to energy.
Multiply by the explicitly given conversion value.
Result: Q ≈ 0.15648 MeV ≈ 156.48 keV. The uncertainty of the mass difference has not been propagated separately here.
Check: The parent atomic mass is larger, giving positive Q. Energy is shared between electron, antineutrino and recoil; it is not the fixed energy of every beta electron.
Equal halvings on different time scales
Remaining fraction of parent nuclei
A short half-life means rapid relative depletion of that parent nuclide. Activity also depends on the number of parents present. Half-life alone determines neither an arbitrary sample’s activity nor a radiation dose. Different nuclides should therefore not be ranked as simply “stronger” or “weaker” from this one number.[3]
Five exercises on states, data and models
Calculate · Application
How many neutrons does uranium-235 contain when Z = 92? Does 235 also mean an exact atomic mass of 235 u?
Show hint
Use N = A − Z and distinguish a count from mass.
Learning goal: Calculate neutron number and distinguish mass number from atomic mass.
Show solution and calculation
N = 235 − 92 = 143 neutrons. 235 is the mass number; the table gives a neutral-atom mass of approximately 235.0439281 u, not exactly 235 u.
Calculate · Application
An isolated fluorine-18 parent population decays without replenishment. With T½ = 109.734 min, what fraction remains after 219.468 min?
Show hint
Both times are already in minutes. First determine t/T½.
Learning goal: Insert a tabulated half-life and consistent time ratio into the decay model.
Show solution and calculation
t/T½ = 219.468/109.734 = 2.
Thus N/N0 = 2−2 = 1/4 = 25%.
This is the model parent population, not the fraction of the total sample mass that vanished.
Interpret · Application
Interpret 3.01604928132(8) u for tritium. Is the parenthetical digit the same as the mass number?
Show hint
The uncertainty applies to the last reported decimal place.
Learning goal: Read the last-digit convention for mass uncertainty correctly.
Show solution and calculation
The value is 3.01604928132 u with an uncertainty of 0.00000000008 u = 8 × 10−11 u.
The mass number of tritium remains 3; the parenthetical 8 counts neither neutrons nor nucleons.
Error analysis · Application
A student writes: “Cobalt-60 turns into nickel-60 by gamma emission alone; gamma increases the proton number.” What is wrong?
Show hint
Check the β− entry and distinguish an element change from de-excitation.
Learning goal: Separate the primary nuclide change from subsequent nuclear de-excitation.
Show solution and calculation
Cobalt-60 has Z = 27.
Beta-minus decay keeps A = 60 and changes Z to 28, giving nickel.
Subsequent gamma transitions from excited states change neither A nor Z.
The proton-number change therefore comes from beta-minus decay, not from the photon.
Rearrange · Application
An idealized carbon-14 model retains 12.5% of the original parent nuclei. Find t using this table’s central value T½ = 5700 a. Is that alone sufficient for real-world dating?
Show hint
12.5% = 1/8. Count the halvings or solve the exponential equation for t.
Learning goal: Derive a model time from a remaining fraction and identify its application limit.
Show solution and calculation
1/8 = 2−3, giving t = 3 × 5700 a = 17 100 a in the specified model.
Real dating also requires an initial ratio, reservoir/contamination effects and calibration; this calculation is not a complete dating method.
Is a nuclide’s mass equal to its mass number?
No. Mass number A counts protons and neutrons and is a whole number without a unit. The listed mass is instead the mass of a neutral atom in u. Binding energies and unequal particle masses mean that its numerical value is usually not exactly A. Only the neutral carbon-12 atom in the defined ground state has exactly 12 u as the reference. Thus A = 14 for carbon-14 does not mean m = 14 u. The periodic table also often gives an isotope-weighted elemental value; that is not a replacement mass for one explicitly named isotope.[1][2]
How do I read parenthetical uncertainties and the units a or d?
Parentheses apply to the last reported digits of the numerical value. For cobalt-60, 5.2714(6) a means 5.2714 years with a stated uncertainty of 0.0006 years, not six years or six percent. The symbol a denotes year, d day, and min minute. For 5.70(3) × 103 a, the uncertainty is also multiplied by 103, giving 5700 ± 30 years. These are evaluated reference values, not new measurements made here. If a calculation converts years to seconds, the chosen convention for the length of a year must also be stated.[1][2]
Are atomic mass and nuclear mass the same?
No. A neutral-atom mass includes the electron shell and its binding energy. Obtaining nuclear mass requires subtracting Z electron masses and accounting for electronic binding energy. Simply subtracting Z electron masses is an approximation, not an exact conversion. Neutral-atom masses can nevertheless be used directly in many energy balances because suitable electron contributions cancel in the complete reaction balance. The usual β− Q value from parent and daughter atomic masses is one example. Consistency is essential: combining a nuclear mass on one side with a neutral-atom mass on the other can produce an incorrect energy result.[3]
Has exactly half of every sample decayed after one half-life?
One half is the expected remaining fraction for a large population of identical, independently decaying parent nuclei. Individual decays are random, so small populations may show substantial fluctuations. The model leaves one quarter of the initial parents after two half-lives and one eighth after three. It does not imply that the sample’s total mass disappears in the same proportion: daughter nuclei and other particles may remain. A mixture of radionuclides or replenished parents often cannot be described by one exponential for the entire measured count rate. Background and detector efficiency also matter in an actual activity measurement.[3]
Why do some classroom values differ, and what does “stable” mean?
An evaluation combines measurements into a named set of recommended data. This table uses NUBASE2020 half-lives, including 5700 ± 30 years for carbon-14. Other textbooks may use differently evaluated or rounded values such as 5730 years; do not mix them silently within a calculation. Stable does not mean a half-life of zero. Here it means that the chosen evaluation lists no radioactive decay for that ground state. A metastable state requires its own entry: stable ground-state barium-137 must not be equated with excited barium-137m. Precise work therefore always includes the edition, nuclear state and uncertainties.[1][2]
Sources for this explanation
Quanta · Updated November 10, 2026
- M. Wang et al.: The AME 2020 atomic mass evaluation (II). Chinese Physics C 45 (2021) 030003; DOI 10.1088/1674-1137/abddaf
- F. G. Kondev et al.: The NUBASE2020 evaluation of nuclear physics properties. Chinese Physics C 45 (2021) 030001; DOI 10.1088/1674-1137/abddae
- OpenStax University Physics Volume 3, 10.3: Radioactive Decay
- BIPM Monographie 5, volume 1 (2004), fluorine-18 decay scheme, printed p. 21
Editorial responsibility: Quanta Study editorial team
Review scope
This explanation, 2 worked examples and 5 exercises are available in German and English. Structure, source references and mathematical notation undergo automated checks. Calculations, model assumptions and both language versions receive a separate AI review.
An independent, named human subject review has not yet been documented. Our exercise numbers are worked examples, rather than measurements published by the cited sources.
Editorial responsibility, sources and methodsChange history
- Explained selected AME2020 atomic masses and NUBASE2020 decay data with uncertainties, state distinctions, two worked examples and five exercises.
Cite this reference page
Quanta. Nuclide table: atomic masses and half-lives. Updated November 10, 2026. https://quanta-study.de/en/formula-sheet/tables/nuklidmassen-zerfallsdaten
When citing a specific scientific statement, also cite the specialist source linked to that statement.
