Conditions belong to the lookup value
The listed temperatures are equilibrium guide values. Solid and liquid can coexist at melting, and liquid and gas at boiling. Supercooling, superheating, impurities or temperature gradients can shift experimental observations. A table does not promise that every real sample changes phase instantaneously at one moment.[3][1]
The common pressure is 101.325 kPa, one standard atmosphere. By contrast, 1 bar is 100 kPa. The difference is often small for rough classroom calculations, but the reference conditions are not identical. Water boils at lower temperature at lower external pressure, so 100 °C cannot be assumed everywhere.[3]
A water–ethanol mixture has different phase boundaries from either pure substance. Coexisting liquid and vapour can also have different compositions. This table therefore replaces neither a mixture boiling curve nor a phase diagram across arbitrary concentrations.[3]
Account for temperature change and phase change separately
The first term applies within one phase using an appropriate approximation for c. L belongs to the specified phase change and pressure.[3]
During an idealised melting plateau of a pure substance at constant pressure, energy can enter while temperature stays constant; the phase fraction changes. “ΔT = 0, so Q = 0” would misuse the heating formula. Add separate contributions for a complete heating path.[3]
The latent-heat formula describes the phase-change term. The heat-capacity formula describes separate warming stages.
Why CO2 has no normal boiling point in this table
NIST gives CO2 a triple-point pressure of about 5.185 bar, or 518.5 kPa. Our table pressure, 101.325 kPa, is below that. There is no stable equilibrium liquid below triple-point pressure. Dry ice therefore sublimes to gas under these conditions; a sublimation temperature is not a normal boiling point.[4]
The pressure comparison explains the absent stable liquid phase; this is not merely missing data.[4]
Two complete applications
Melt ice at 0 °C and warm the water
- Given
- m = 0.100 kg ice at 0 °C, ending as liquid water at 20 °C, p = 101.325 kPa. Classroom model: Lf ≈ 334 kJ/kg and constant water c ≈ 4.183 kJ/(kg·K), without losses.
- Find
- Calculate melting and subsequent heating separately.
The initially solid ice first needs melting energy.
Only then heat the liquid water in the simplified model.
Add both process contributions.
Result: About 42 kJ in the specified classroom model. c was approximated as constant over 0–20 °C; a precision balance requires c(T).
Check: Melting requires more energy than the subsequent 20 K rise. One mcΔT term would omit the large first contribution.
Classify the phase of nitrogen
- Given
- Pure nitrogen at equilibrium, 101.325 kPa and −200 °C. Listed melting point: −210.0 °C; boiling point: −195.79 °C.
- Find
- Compare the temperature with both phase boundaries.
The temperature is above melting.
It is also below boiling.
Result: −210.0 °C < −200 °C < −195.79 °C: nitrogen is liquid under these equilibrium conditions.
Check: The ordering is preserved in kelvin. Different pressure requires a new check.
A heating path has distinct stages
Five exercises on phase boundaries
Calculate · Application
Convert ethanol’s listed boiling temperature, 78.29 °C, to kelvin.
Show hint
For an absolute temperature, add the 273.15 offset.
Learning goal: Convert absolute temperature without changing reference conditions.
Show solution and calculation
T = 78.29 + 273.15 = 351.44 K.
The reference pressure remains 101.325 kPa; unit conversion does not change conditions.
Calculate · Application
At 101.325 kPa, what is the temperature interval between methanol melting and boiling?
Show hint
Subtract the negative melting value, −97.53 °C, from 64.6 °C.
Learning goal: Calculate an interval spanning negative temperatures.
Show solution and calculation
ΔT = 64.6 − (−97.53) = 162.13 K, or about 162.1 K at the input precision.
Kelvin and Celsius differences share the same numerical value.
Error analysis · Application
A draft labels −79 °C as “CO2 boiling point at normal pressure”. Why must it be corrected?
Show hint
Compare normal pressure with CO2 triple-point pressure.
Learning goal: Distinguish sublimation from a liquid–gas transition.
Show solution and calculation
At 101.325 kPa, pressure is below the triple point.
CO2 has no stable liquid phase there.
The process is sublimation, not normal boiling.
Interpret · Application
During an idealised melting plateau, pure ice takes in energy without warming. What changes?
Show hint
Consider solid and liquid fractions.
Learning goal: Interpret a temperature plateau as phase conversion.
Show solution and calculation
The liquid fraction grows at the expense of the solid.
Q = mL accounts for phase conversion; ΔT = 0 does not mean Q = 0 here.
Transfer · Application
A problem considers water at high altitude with lower external pressure. May 100 °C be used unchanged as its boiling temperature?
Show hint
The tabulated value belongs to one specified pressure.
Learning goal: Recognise a missing pressure condition in an application.
Show solution and calculation
Not without checking.
At lower external pressure water boils at lower temperature.
A numerical value requires local pressure and appropriate vapour-pressure data or a suitable model.
Common melting and boiling questions
Does water always boil at 100 °C? Only approximately under the stated conditions. Pressure, purity and experimental effects must match the comparison.
Are evaporation and boiling identical? Surface evaporation can occur below boiling temperature. The boiling point describes the liquid–gas boundary at the specified pressure.
Does every material have a sharp melting point? No. Mixtures and amorphous materials can have transition ranges. “Glass melts at one exact temperature” is not a universal statement.
Why are some CO2 numbers absent? The table states a physical exclusion at this pressure, not incomplete research: a stable liquid phase cannot exist there.
Is temperature difference enough for a complete heat balance? No. A path crossing phase boundaries needs separate within-phase and phase-change contributions.
Sources for this explanation
Quanta · Updated November 7, 2026
- IQB/KMK: Mathematisch-naturwissenschaftliche Formelsammlung, Stand 04.07.2023, S. 58
- IQB/KMK: Mathematisch-naturwissenschaftliche Formelsammlung, Stand 04.07.2023, S. 52
- OpenStax University Physics Volume 2, §1.5: Phase Changes
- NIST Chemistry WebBook: Carbon dioxide, phase-change data and triple-point pressure
Editorial responsibility: Quanta Study editorial team
Review scope
This explanation, 2 worked examples and 5 exercises are available in German and English. Structure, source references and mathematical notation undergo automated checks. Calculations, model assumptions and both language versions receive a separate AI review.
An independent, named human subject review has not yet been documented. Our exercise numbers are worked examples, rather than measurements published by the cited sources.
Editorial responsibility, sources and methodsChange history
- Added pressure-specific melting and boiling data, the CO₂ distinction, a heating path, two examples and five exercises.
Cite this reference page
Quanta. Melting and boiling points of selected substances. Updated November 7, 2026. https://quanta-study.de/en/formula-sheet/tables/schmelz-siedepunkte
When citing a specific scientific statement, also cite the specialist source linked to that statement.
